Latest activity
-
CHello - I have a question on my RT that is on my lift when I am taking a reading: 1. Which fuel guage is the correct one to use and rely...
-
Rode Trip replied to the thread Replacement Rudder and possible upgrades?.I agree with everything Brian wrote above, but I don't believe it addresses your problem. That's not galvanic corrosion in the pictures... -
Rode Trip replied to the thread 2013 R25SC fuel gauge.My 2013 with a Yanmar only has the fuel displayed on the Yanmar display.
-
EEpicMale reacted to Submariner's post in the thread Do Ranger Tugs come with a “Calm Seas” button? with
Props.
Offshore is the same for all of us small boats. Watch the weather forecast, that's your limiting factor. It's not even so much about... -
EEpicMale reacted to scross's post in the thread Do Ranger Tugs come with a “Calm Seas” button? with Props.
The boats are pretty strong. It’s more about your personal comfort level. In our R-25 Classic we occasionally were in solid 2 ft / 2...
-
az9133bm replied to the thread 2021 r-23 autopilot instal.I'd be happy to provide pictures of a 2017 factory installation of the autopilot associated systems. Likely, there's not many... -
-
RI replaced the batteries on my 2020 Ranger Tug R-23 and I have not been able to reset the inverter to switch from shore power to battery...
-
-
Thanks for the information. We have always used zincs in our area, so I never questioned or researched aluminum verses zinc. You make...
-
RRTC replied to the thread Anode Plate on stern.Thanks for the information. We have always used zincs in our area, so I never questioned or researched aluminum verses zinc. You make...
-
Rode Trip replied to the thread Anode Plate on stern.I think a lot of it depends on where in the Chesapeake you are. Southern bay I think you're fine with zinc, but where it gets closer to...
-
LI own a 2023 Ranger R25 located in the Marina in Santa Barbara. I typically leave my boat in my slip from mid-October to mid-May. I have...
-
Andy, thanks for the reply. No, most marine yards don’t for the most applications use aluminum anodes on the Chesapeake. I do use them...
-
RRTC replied to the thread Anode Plate on stern.Andy, thanks for the reply. No, most marine yards don’t for the most applications use aluminum anodes on the Chesapeake. I do use them...
-
Rode Trip replied to the thread Anode Plate on stern.Unfortunately, many surveyors are not also corrosion experts. Seeing the bottom paint disrupted around a bonded hull fitting is not...
-
Hhdw replied to the thread 2011 21ec drum anchor winch.Great write up Ornery! A few questions: What remote did you use? and What hinged anchor roller did you use? Any second thoughts on the...
