GaylesFaerie
Well-known member
- Joined
- Jul 20, 2020
- Messages
- 579
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLT2701D112
- Vessel Name
- Gayles Faerie
Hi,
I just purchased the Subject boat used and either I don't know how to turn on the overhead light just outside the cabin door or the bulb is out. In general, the boat is in very good condition and everything is operating well.
There are two small rocker switches port side just as you enter the cabin at waist height (see pictures). The forward one turns on the white cabin overhead lights. The stern one does nothing that I can tell. I wonder if that switch operates the exterior overhead light just outside the door? If it does, then the bulb may be out cause flipping the switch does nothing.
I opened the light fixture to check the bulb but it appears to be a completely sealed unit with no easy to detach electrical connections either. My questions:
1. What does the stern-ward switch operate?
2. If the bulb is the issue, is it replaceable? Or do I need to cut the wires to the fixture and replace the whole thing?
The HID is FMLT2701D112.
Link to pictures: https://photos.app.goo.gl/uWfLEXBZsKS3vXP98
Thanks for making such a great vessel.
GF
I just purchased the Subject boat used and either I don't know how to turn on the overhead light just outside the cabin door or the bulb is out. In general, the boat is in very good condition and everything is operating well.
There are two small rocker switches port side just as you enter the cabin at waist height (see pictures). The forward one turns on the white cabin overhead lights. The stern one does nothing that I can tell. I wonder if that switch operates the exterior overhead light just outside the door? If it does, then the bulb may be out cause flipping the switch does nothing.
I opened the light fixture to check the bulb but it appears to be a completely sealed unit with no easy to detach electrical connections either. My questions:
1. What does the stern-ward switch operate?
2. If the bulb is the issue, is it replaceable? Or do I need to cut the wires to the fixture and replace the whole thing?
The HID is FMLT2701D112.
Link to pictures: https://photos.app.goo.gl/uWfLEXBZsKS3vXP98
Thanks for making such a great vessel.
GF