racurry@unb.ca
Active member
- Joined
- Oct 30, 2022
- Messages
- 33
- Fluid Motion Model
- R-23 (Sterndrive)
- Vessel Name
- Water Weaver
Still looking for this so before I start pulling wall panels any advice??
2016 C30S where is the ghp 20 CCU?
- Thread starter racurry@unb.ca
- Start date
-
- Tags
- 2016 model year garmin
racurry@unb.ca
Active member
- Joined
- Oct 30, 2022
- Messages
- 33
- Fluid Motion Model
- R-23 (Sterndrive)
- Vessel Name
- Water Weaver
Ccu found directly under throttle behind the starboard panel far into the quarter berth.
- Joined
- Aug 19, 2014
- Messages
- 512
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cal 2-25
- Vessel Name
- S/V Saylee
- MMSI Number
- 338124769
Hi there,
You beat me to it! But yes, a lot of the electrical components, including the thruster remote receiver are in that area. Just chiming in as it's a good thread for others who are looking for those items. They can be accessed by removing the rat fur covered panel, up against the hull on the forward side of the quarter berth. If necessary, wiring running aft from the helm can also be reached by removing the narrow panel on the ceiling up against the hull side in the quarter berth.
Cheers,
Ralf
You beat me to it! But yes, a lot of the electrical components, including the thruster remote receiver are in that area. Just chiming in as it's a good thread for others who are looking for those items. They can be accessed by removing the rat fur covered panel, up against the hull on the forward side of the quarter berth. If necessary, wiring running aft from the helm can also be reached by removing the narrow panel on the ceiling up against the hull side in the quarter berth.
Cheers,
Ralf