2026 Cutwater c-cb32 leak

pathenny

New member
Joined
Sep 6, 2026
Messages
3
Fluid Motion Model
Cutwater Models
Water enters the cabin on the port side, forward, underneath the box that houses the reading lamp and enters at the bulkhead. Taking measurements, I determined it is leaking against/aft of the anchor locker. The adjacent, port dock light is also fogged up with moisture. It leaks when running or when raining. I am puzzled on how to trace and repair the leak.
 
Hi there,

The leak may be getting past the seal of the docking light itself. You can easily remove it by taking off the bezel by removing the single screw at the bottom, and then the screws holding the light on. I would try to test that light first by spraying the light down with a hose and having someone else observe inside the vberth if water comes in. Hope this helps but let us know.

Cheers!

Ralf
 
Back
Top