Anchor on a2015 R27

M

Martin

Active member
Joined
Sep 20, 2020
Messages
26
Fluid Motion Model
C-28
I have a 16lb Lewmar claw anchor and thinking of increasing the weight but I don't want to make any changes to the bow roller, does anybody have any experience with this or suggestions.
thanks
Martin
 
I put a stainless Rocna 10 (and 50 ft of stainless chain) on my 2011 R27. I had to move the bow roller forward to the rear bolt holes and put on a taller bail. The anchor comes up and houses easily on the roller. Just be gentle with the last few feet of chain when retrieving so you don't slam the point of the anchor into the plastic bow board. I went stainless for the cleaner aspect of the metal when doing part of the Loop. As stated by other contributors on this forum, stainless is "more slippery" and comes off the bottom holding less mud/dirt, etc.
 
You must log in or register to reply here.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top