C-288 XM weather route

[JunieBird]

Hi,
Our SiriusXM GMX54 module needs to be replaced. Received a new antenna and module from Garmin. What is the wiring path/access from the module to the Fusion Radio (port side) and the MFDs on the helm? I assume there are cable extenders involved somewhere during the path.. and wire ties? Is it better to just re-fish the lines from the port/aft module location? Thank you-

Junie Bird- C-288

 

[JunieBird]

Awesome, thank you for the response.... The data cable passes to mid-line where in joins the data-cable extender that runs to the helm. The data-cable extender 'junction' is mounted to cables along the bulk head over the fuel tanks and is easily accessed from the center-line hatch. The audio cable passes forward, along the port hull, above the 'cave'. Identify the cables and just cut them as there are multiple rip-ties. The RCA jacks for this cable extender can be located by removing the rectangular panel in the cave- easy to do as there are only two screws- one of which does not engage in anything.... So after replacing the module, make sure to adequately support the fuzzy panels...

JB