zzr7ky
Well-known member
- Joined
- Sep 4, 2024
- Messages
- 62
- Fluid Motion Model
- R-21 EC
- Hull Identification Number
- FMLT2113H213
Hi-
My Airmar p79 transducer locking ring won't budge!
Clean, dry, tapped on it, strap wrench, even made an aluminum tool to engage the pair of round holes... the 2 screws were missing.
I had serious torque on it. I was thinking the whole assembly would let go of the hull.
Any ideas welcome. Probably going to warm it up with heat gun.
My Airmar p79 transducer locking ring won't budge!
Clean, dry, tapped on it, strap wrench, even made an aluminum tool to engage the pair of round holes... the 2 screws were missing.
I had serious torque on it. I was thinking the whole assembly would let go of the hull.
Any ideas welcome. Probably going to warm it up with heat gun.