curtisgeiger
Active member
- Joined
- May 10, 2024
- Messages
- 40
- Location
- Brookings, OR
- Fluid Motion Model
- R-23 (Outboard)
- Hull Identification Number
- FMLT2311J223
- Vessel Name
- Living Water
- MMSI Number
- 338470694
Thanks Jared - I looked in both those lockers - guess I will look again.Yes, there are pre wires to do the down rigger plugs. You can find them in the port and Stbd cockpit hatches. Inside the wire bundles on both sides.
They are secured forward on the inside the hatches toward the cabin wall.
View attachment 23596
They are most likely behind the white boards inside the hatches. The wires will be labeled as well. You are looking for the hot wire that is red with white stripes and a same size yellow wire tapped to it. They are to the top of the white board. Both are 10 AWG wires.Thanks Jared - I looked in both those lockers - guess I will look again.
Curt
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.