S Scott
Wreckless Time
- Joined
- Aug 18, 2024
- Messages
- 20
- Location
- Savannah, GA
- Fluid Motion Model
- R-27 (Outboard)
- Vessel Name
- Wreckless Time
Hi. I want to convert my head in my R27 OB to a fresh water flush and was looking for options. Would it be an easy option to close the raw water valve and disconnect the hose where it connects to the strainer and re-route that hose to a T connector that I would add to the fresh water line that feeds the stern shower and sink? I also see there is a T connector in the raw water hose a little further forward that feeds the raw water wash down . If the conversion is possible this way, that would also give me a fresh water wash down correct? This just seems like easier access to add a T connector to a fresh water line than up near the head. Thank you for any advice.
