My Garmin and Yamaha CL5 guage show different fuel levels. I've reset fuel settings on the Garmin and add fuel manually in settings on each fill up. But even after resetting and calibrating the CL5, it always show 52% full even after a full fillup. Should I just ignore the CL5 guage?
Garmin MFD and Yamaha Cl5 display different fuel levels
- Joined
- Aug 19, 2014
- Messages
- 559
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cal 2-25
- Vessel Name
- S/V Saylee
- MMSI Number
- 338124769
Hi there!
The information you see on the Yamaha screen is from the level sender in the tank, which is susceptible to motion, boat attitude and so on. The best way to set this is to set the tank to full on the Garmin plotter when you know that the tank is full, just as you filled it. The gauge on the Yamaha panel should then also be at the top. Let me know if that makes sense.
Cheers!
Ralf
The information you see on the Yamaha screen is from the level sender in the tank, which is susceptible to motion, boat attitude and so on. The best way to set this is to set the tank to full on the Garmin plotter when you know that the tank is full, just as you filled it. The gauge on the Yamaha panel should then also be at the top. Let me know if that makes sense.
Cheers!
Ralf