Raw water pump valve relocation

[Angler]

I have a cutwater 302 c and wanted to know if there was way to relocate the valve for the live bait tank and the raw water wash down to a more convenient and accessible location

 

[KennyMarrs]

Are you talking about the seacock/ball valve? If so that one cannot be relocated. You're first point of contact inside the hull has to be a shut off valve.

Thanks,
-Kenny

 

[Angler]

Sorry I should’ve have been clearer it’s the valve that fills up the bait tank and if you want to use the raw water wash down you have to turn to divert the water to the wash down . It’s located under the bait tank and you have to remove the panel under the rear seat to access

 

[Angler]

Sorry I should’ve have been clearer it’s the valve that fills up the bait tank and if you want to use the raw water wash down you have to turn to divert the water to the wash down . It’s located under the bait tank and you have to remove the panel under the rear seat to access

Sent from my iPhone using Tapatalk

 

[Kevin Lamont]

I have a cutwater 302 c and wanted to know if there was way to relocate the valve for the live bait tank and the raw water wash down to a more convenient and accessible location

You would need to re-route hoses and most likely lengthen the hoses as well, I can understand why you would want to due to the location but unfortunately this was the best spot for dual purpose of the wash down pump and live well fill. It maybe easier to install a second pump and switch so a dedicated wash down and dedicated fish box fill if you are planning on using both functions regularly. Hope this helps and let me know if you have any other questions, you can email direct.

Thank you,

 

[Angler]

Thanks I had North Shore yachts reroute the lines and a separate pump and it works great


Sent from my iPhone using Tapatalk