DeepSeaDyer
Member
- Joined
- Jul 11, 2020
- Messages
- 11
- Fluid Motion Model
- C-242 C
- Hull Identification Number
- FMLT2337L920
- Vessel Name
- Steve Dyer
Hi Team,
I own a 2020 Ranger Tug R23 - fully loaded about 6600 lbs.
I keep my boat on a mooring ball in a secluded cove on Mahone Bay, Nova Scotia.
I had a poor experience mooring my boat with bridles through the bow chocks to the central cleat. Mooring rope chafed until parted in rough weather.
I currently moor utilising the tow trailer nose eye.
Is it possible to replace the two Bow Chocks with Cleats and connet bridles directly to the bow cleats?
If so, do you sell the Cleats?
could you also send a picture looking down with the bow in view of the correct orientation of the chokes - I believe mine may be on backwards.
Thank You
Steve
902-514-5465
I own a 2020 Ranger Tug R23 - fully loaded about 6600 lbs.
I keep my boat on a mooring ball in a secluded cove on Mahone Bay, Nova Scotia.
I had a poor experience mooring my boat with bridles through the bow chocks to the central cleat. Mooring rope chafed until parted in rough weather.
I currently moor utilising the tow trailer nose eye.
Is it possible to replace the two Bow Chocks with Cleats and connet bridles directly to the bow cleats?
If so, do you sell the Cleats?
could you also send a picture looking down with the bow in view of the correct orientation of the chokes - I believe mine may be on backwards.
Thank You
Steve
902-514-5465
Last edited: