Underwater Lights Cutwater28

Status
Not open for further replies.

CaptainDavid

Member
Joined
Jul 4, 2016
Messages
10
Fluid Motion Model
C-24 C
Non-Fluid Motion Model
Cutwater 28
Vessel Name
Sapphire Day
My underwater lights do not work and I need to know if bulb replacement is something my diver can accomplish. And, before I do that, where is the fuse, just in case that might be the issue. Thanks.
 
Greetings,

Certainly not an electrician; however, from reviewing the C28 Manual it seems we can get close to your answer. The link below will let you download the manual.

download/file.php?id=259

Page 37 schematic shows the underwater lights as being fused at the Sub Panel 3 Switch (20 Amp). Page 11 shows the 3 Panel Switch fuse block being located behind the carpeted panel below the main power panel and is labeled as such in the manual.

Hope this helps,
Gary
 
Gary, I looked in there and had trouble identifying the precise fuse. I'll check again before I jump to bulb replacement. Thx

David
 
David,

The photo on page 11 of the manual shows the exact fuse location. It's titled "3 Switch Panel" in the manual. I believe it is located on Fuse Block 3.

Also, the same fuse serves your deck lights. So, they the deck lights are working that fuse should be OK.

Gary
 
Status
Not open for further replies.
Back
Top