weston
Member
- Joined
- Apr 10, 2016
- Messages
- 11
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cutwater 28
- Vessel Name
- Bella
Hello Everyone,
I wanted to share with you a project I just completed on my Cutwater 28. I installed a Watermaker that produces approx.
12 gallons of fresh water per hour. I placed the pressure vessel assy in the aft seat compartment and the rest of the system in the engine compartment, behind the diesel engine. The product water is plumbed directly into the fresh water tank. I installed a fresh water flush attachment as well. So you can purge the system of salt water after you are done making water.
The sediment filter is mounted inside a clear housing,giving you a good visual on when to replace the cartridge.
I have a portable 2kw Yamaha Generator that use to power the system...
Take a look at my album, I've uploaded photos of the installation. any questions just pm me or call me @360-981-2325 for more info.
Thanks,
Dana Thomas
I wanted to share with you a project I just completed on my Cutwater 28. I installed a Watermaker that produces approx.
12 gallons of fresh water per hour. I placed the pressure vessel assy in the aft seat compartment and the rest of the system in the engine compartment, behind the diesel engine. The product water is plumbed directly into the fresh water tank. I installed a fresh water flush attachment as well. So you can purge the system of salt water after you are done making water.
The sediment filter is mounted inside a clear housing,giving you a good visual on when to replace the cartridge.
I have a portable 2kw Yamaha Generator that use to power the system...
Take a look at my album, I've uploaded photos of the installation. any questions just pm me or call me @360-981-2325 for more info.
Thanks,
Dana Thomas