You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
We're not wine drinkers...
- Thread starter Boatagain
- Start date
- Status
- Not open for further replies.
Nellie Too
Well-known member
- Joined
- Jan 13, 2009
- Messages
- 793
- Fluid Motion Model
- C-288 C
- Hull Identification Number
- 86
- Vessel Name
- (2009) Nellie Too
It's also an extra frig.
Yea.... as Bob has mentioned or alluded to.... be sure you want to remove this as it does provide extra cooling features.
For our new 2018 R-27 we elected to have the cockpit located refrigerator rather than an ice maker as we've always found we need extra room for refrigeration. If for no other reason the cockpit located refrigerator makes it real easy to access cooled refreshments and food items while in the cockpit with family & friends alike. There's so much storage area in the new 2018 R-27 I feel no need to add extra storage at this time... 😉
For our new 2018 R-27 we elected to have the cockpit located refrigerator rather than an ice maker as we've always found we need extra room for refrigeration. If for no other reason the cockpit located refrigerator makes it real easy to access cooled refreshments and food items while in the cockpit with family & friends alike. There's so much storage area in the new 2018 R-27 I feel no need to add extra storage at this time... 😉
- Joined
- Nov 21, 2008
- Messages
- 1,389
- Fluid Motion Model
- C-24 C
It can be removed quite easily. I believe it is held down with brackets on the backside that you should be able to get too. Once you remove you might have to finish off the inside. If you want to send me photos to my email of your installation I can make sure you do it right.
andrewcustis@rangertugs.com
andrewcustis@rangertugs.com
The panel is screw in place with fasteners buried in the rat fur. once you get it removed there are 2 L brackets that hold the wine cooler in place, this area is base coated so finishing it off should be fairly easy. If you have any questions please feel free to call me
Boatagain
Well-known member
- Joined
- Sep 13, 2014
- Messages
- 252
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cutwater 30
- Vessel Name
- Gatsby
As a follow up, I did remove the cooler and gained lots of storage space as a result.
The space is considerably larger than the cooler itself. I didn't bother to refinish the inside, it's reasonably smooth, unfinished (no gelcoat) FRP. I simply vacuumed and wiped down the space. We use it to store our current trash bag and cleaning supplies. With a little imagination it can be transformed into anything you want.
The space is considerably larger than the cooler itself. I didn't bother to refinish the inside, it's reasonably smooth, unfinished (no gelcoat) FRP. I simply vacuumed and wiped down the space. We use it to store our current trash bag and cleaning supplies. With a little imagination it can be transformed into anything you want.
- Status
- Not open for further replies.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu