Latest activity

  • R
    ridesn replied to the thread propane stove issue 2014 C28.
    I believe a 5gal fiberglass propane tank exists but it's shape may not fit in the locker. My solution to the rusting propane tank issue...
  • CarrieIF
    Why is the large heat vent in the stateroom and a much smaller heat vent in the salon that is filled with wonderful windows that let in...
    • IMG_5945.jpeg
  • Full_O_Fish
    Full_O_Fish replied to the thread Seat.
    Had to replace mine on the C30, just need to remove the mounting bolts on the bottom that hold the head to the floor. Then you can...
  • M
    Mastercraft replied to the thread Fuel injector additive.
    Buy Sea Foam by gallon on Amazon. I use a gallon at one time in a 145 gal tank on R29 once a year. I am a believer. It is a chemical...
  • S
    sfladgard replied to the thread Towing a Dinghy.
    10ft tru kit catamaran with motor up to 12 knots, without motor 17 knots. smooth water!
  • V
    venajeff replied to the thread Engine Hatch on a R27.
    This is the info on the (2) gas struts on our R27 center lazarette. If yours aren't holding up the lid anymore you probably need to...
    • 1000011639.jpg
  • fidalgoisland
    fidalgoisland replied to the thread Raw water issues with 27OB.
    Most of the parts I found on Amazon. I tried a couple other tanks before I found one that fit the best. It is modified...I added the...
  • R
    robbinrh posted the thread Towing a Dinghy in Chat.
    Does anyone have any advice about towing an inflatable dinghy behind a Ranger Tug R-23? (Or towing water skis or tubes)?
  • M
    I’m about to finalize the purchase of an R25 with a VP D3 150 hp inboard. It’s a great boat but I’m concerned about the availability of...
  • W
    Brendan: I also have a 2011 RT 27 and have having lots of steering issues as others talk about. Found that the 0.8 Liter pump frame...
  • G
    Gwkessel posted the thread Seat in Ask the Cutwater Factory.
    Has anyone had to replace toilet seat in head. I cannot access the 2 bolts that go through bowl to secure nuts underneath bowl. Thanks, G
  • L
    Lemonade II replied to the thread Garmin Check Valve Upgrade.
    Any chance that low Hydraulic fluid would impact this? My C28 is doing this but I don't remember it doing this last year - I do however...
  • scross
    scross replied to the thread Engine Hatch on a R27.
    You might want to do a search for prior discussions about the hydraulic hatch piston (aka ram). My memory remembers that the ram FM used...
  • bob daily
    bob daily posted the thread Waterlock leak in Chat.
    After doing my annual maintenance, I ran the engine prior to degreasing and cleaning to make sure everything was working correctly. I...
    • IMG_4107.jpeg
    • IMG_4110.jpeg
    • IMG_4111.jpeg
    • IMG_4109.jpeg
  • S Scott
    S Scott replied to the thread Raw water issues with 27OB.
    I like that looks of that. Where did you get the tank?
Back
Top