serendipity
Well-known member
- Joined
- Mar 7, 2024
- Messages
- 65
- Location
- Marion, MA
- Fluid Motion Model
- R-27 (Outboard)
- Vessel Name
- Serendipity
We used a king sized topper to make our v-berth topper in our 2023 R27 OB.
It's easier to tuck a sheet under a soft 3" pad.When you folks speak about mattress toppers, that means you are dropping a new mattress or memory foam over the factory cushions? Why not remove the factory stuff and replace with a thicker mattress or piece of foam? My plan is to remove the upholstery and foam components of the v-berth and retain the boards so I have a rigid base under the new 4" memory foam. I'd appreciate comments/thoughts. I've never done this before... What am I missing?
Five years ago, I had an upholstery shop add 1 1/2” of memory foam to the existing cushions on my 2012 R27. There was enough excess fabric on the cushions so the extra foam did not require replacing the fabric.Why not remove the factory stuff and replace with a thicker mattress or piece of foam? My plan is to remove the upholstery and foam components of the v-berth and retain the boards so I have a rigid base under the new 4" memory foam. I'd appreciate comments/thoughts. I've never done this before...
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.