Latest activity
-
TTioga T reacted to watson1987's post in the thread Solar PV inverter and heaters for indoor storage with
Props.
The outlets are powered by your inverter (AC voltage). Your inverter is also your battery charger when plugged in to shore power. Your... -
KKlkranz replied to the thread In search of Garmin Radar Dome.Will do. Thanks very much.
-
RI am considering a 2012 c26 with a 4by2-180. It has about 600 hours and the condition seems good. I understand this is a marinized BMW...
-
We want to mount a life ring holder on the exterior of the starboard side of the cabin on our 2014 R29S. I’m nervous about drilling... -
az9133bm replied to the thread vertical clearance.Go to their most recent YouTube video and leave a comment. They're specifically developing a video that addresses Ranger Tugs on the... -
ZExcellent suggestion. Thanks
-
RRTC replied to the thread Garmin Tranducer.Excellent suggestion. Thanks
-
Zzzr7ky replied to the thread Garmin Tranducer.Hi- No clue on the compatibility. However I did run a new wire to replace the p79 transducer. I cut the wire at the old transducer...
-
Ppaulgermain replied to the thread vertical clearance.will definitely try this, as the Lachine Canal opens a diferent playgroung, without the nuisance of commercial locks. I have tried to...
-
BBsmith replied to the thread Shower Mixing Valve.Does your shower look like this...
-
BBsmith replied to the thread Shower Mixing Valve.My bad. This is what my R27 has...
-
BBsmith replied to the thread Shower Mixing Valve.I believe that is a Scandvik item. Here is a link for the mixing valve but you might have to replace the entire unit...
-
az9133bm replied to the thread 2021 r-23 autopilot instal.Our system is obsolete and no longer available (https://www.garmin.com/en-US/p/501324/). Consider reviewing our systems specs for...
-
BBsmith replied to the thread vertical clearance.I rechecked our air draft on our R27 and with the mast and antenna down we are at about 8.5’ (in fresh water). With the radar off you...
-
BBsmith replied to the thread vertical clearance.The most recent YouTube video from Salty Mittens talks about how they reduced their air draft for transiting some canals in Montreal...